My Blog

Posts for tag: dental implant

By South Lyon Dental Care Center
September 12, 2020
Category: Dental Procedures
Tags: dental implant  
StopPlaqueBuildupAroundYourImplant-SupportedBridgeWithFlossing

Losing your teeth can be a traumatic experience with serious consequences for your overall health. Fortunately, you have great options for replacing lost teeth that can restore both appearance and dental function.

One such option is a fixed bridge supported by dental implants. While implants are best known for single tooth replacement, they can also be used with other restorations like bridges. In this case, the bridge is screwed into a few well-placed implants to support it.

Implants can provide bridges with more security and support, and without the need to alter adjacent teeth that are commonly used for traditional tooth replacement. They may also slow or stop bone loss because the titanium in implants naturally attracts bone cells that grow and adhere to its surface and provide stimulation to the bone cells during function.

Because of these benefits an implant-supported bridge could be a life-changer that provides years of satisfaction. But we can’t simply “set them and forget them”: They require dedicated oral hygiene just like natural teeth.

While the bridge materials and implants themselves are in no danger from disease, the same can’t be said for the implant’s supporting gums and bone. Dental plaque, the main driver in gum disease, can place these tissues at risk for infection that could eventually lead to implant failure.

It’s important, then, for you to floss around your new implants to remove any plaque. This differs from regular flossing in which you work the thread between teeth. Instead, you’ll have to maneuver the floss between the bridge and gums with the help of a floss threader, a small slender tool with a loop at one end and a stiffer plastic edge at the other (similar to a sewing needle).

To use it, first run 18” of floss through the loop until you get equal lengths and then work the tail of the floss threader between the bridge and gums while holding one end of the floss. Once through, you pull the floss threader through so that the floss is on either side of the bridge. Then grab each end of the floss and pull it snug to floss up and down one side of the implant. Go to the next side and repeat this procedure for all the implants.

As an alternative, you could use an oral irrigator, which emits a pulsating spray of water to loosen and wash away plaque. Either way, though, it’s important to floss around implants to get the most life out of your bridge.

If you would like more information on proper care for implant-supported restorations, please contact us or schedule an appointment for a consultation. You can also learn more about this topic by reading the Dear Doctor magazine article “Oral Hygiene for Fixed Bridgework.”

By South Lyon Dental Care Center
August 23, 2020
Category: Dental Procedures
Tags: dental implant  
TheseDigitalToolsIncreasetheSuccessRateofDentalImplants

Nothing beats the form and function of a real tooth—but dental implants come pretty close. That's why they're tops among both dentists and patients for replacing missing teeth.

Much of an implant's functionality and durability can be credited to its material construction, from the titanium metal post imbedded in the jawbone to the lifelike porcelain crown attached at its other end. But an implant's “nuts and bolts” isn't the only reason why this premier dental restoration is so popular: A good portion of their success comes from the adjunct support provided by digital technology.

Without this varied array of computer-based applications used in planning, designing and installing them, implants couldn't produce the level of satisfactory outcomes they currently do. Here then are a few of the high-tech tools dentists use to make sure your implants result in a winning smile.

CBCT scanning. Implant placement requires a high degree of precision often complicated by various anatomical structures like nerves, blood vessels and sinuses within the gums and jaws. Cone Beam Computer Tomography (CBCT) scanners rotate around a patient's head, taking hundreds of digital x-ray images that are then assembled into a 3-D model image. Dentists can view this model from various angles to identify obstacles and better pinpoint the best implant locations.

Digital impressions. Dentists can also create a 3-D digital impression model of the inside of a patient's mouth that can give them views of their current teeth and gums from any angle. This aids in determining the size and type of implant so that it blends seamlessly with remaining teeth. A digital impression can also provide both the dentist and patient a preview appearance of their future smile after treatment.

3-D printed surgical guides. To accurately drill the implant site during surgery, dentists often create a custom-made device called a surgical guide that fits into the patient's mouth during the procedure. Using results from scanning and digital impressions, highly accurate guides can be created with a 3-D printer. This further ensures that the implant will be in the exact best location for the most attractive and functional outcome.

Implantology is as much art as it is science in achieving a beautiful smile. These and other digital tools help make that desirable end a reality.

If you would like more information on dental implants, please contact us or schedule an appointment for a consultation.

By South Lyon Dental Care Center
January 26, 2020
Category: Dental Procedures
DoYouHaveAdequateBonetoSupportanImplant

Besides their life-likeness, implants are also prized for their high success rate. More than ninety-five percent of implants continue to function effectively after ten years.

Implants’ advanced technology explains some of their reliability and longevity—they’re as close to natural teeth as we’re now able to achieve. But their impressive success rate also owes to the detailed protocols that dentists follow to install them. One critical part of these protocols is ensuring a patient has enough bone in their jaw to support and precisely situate the implant for the best functional and aesthetic outcome.

Unfortunately, there are situations where a patient doesn’t have enough bone to achieve a satisfactory result. This often happens if there’s been months or years between losing the tooth and considering an implant. The reason why relates to the nature of bone as living tissue.

Like other cellular tissues in the body, bone has a life cycle: Older, worn-out cells die and are absorbed by the body, and new cells form to replace them. The growth cycle in the jaw receives stimulation from the forces generated when we chew, which travel up through the teeth to the bone.

However, this stimulation stops after tooth loss for the related area of bone, which can slow new bone growth. Over time, the volume and density of the bone around a missing tooth gradually decreases, enough eventually to make an implant impractical.

Insufficient bone volume, though, doesn’t necessarily mean an implant is out of the question. We may be able to address the problem by attempting to regenerate the bone through grafting. This is a procedure in which we insert graft material into the affected area of the jawbone. The graft then becomes a scaffold upon which bone cells can grow. ¬†After several months, we may have enough regenerated bone to support an implant.

If there’s been too much bone loss, we may still need to consider another form of restoration. But if we can successfully build up the bone around your missing tooth, this premier restoration for replacing lost teeth could become a reality for you.

If you would like more information on dental implants, please contact us or schedule an appointment for a consultation.

By South Lyon Dental Care Center
November 07, 2019
Category: Dental Procedures
Tags: dental implant  
GettingaNewToothinOneDayWillDependonYourBoneHealth

If you've thought the ads for a “new tooth in one day” seemed too good to be true, we have…sort of good news. You can get a new “tooth” in one visit, but only if your dental situation allows it.

The restoration in question is a dental implant, a metal post (usually titanium) surgically imbedded into the jawbone. They're especially durable because bone cells naturally grow and adhere to an implant's titanium surface, a process called osseointegration. Over time this process creates a strong bond between implant and bone.

Usually, we allow a few weeks for the implant to fully integrate with the bone before attaching the visible crown. With “tooth in one day,” though, we attach a crown at the same time as we install the implant, albeit a temporary crown. It's more aesthetic than functional, designed to avoid biting forces that could damage the implant while it integrates with the bone. When that process finishes, we'll install a permanent porcelain crown.

The health of your supporting bone and other structures will largely determine whether or not you're a candidate for this “tooth in one day” procedure. Your bone must be sufficiently healthy, as well as the gums surrounding the implant and the tooth's bony socket.

If, on the other hand, you have significant bone loss, gum recession or socket damage, we may first need to deal with these, usually by grafting tissue to the affected areas to stimulate new growth. Your implant, much less a temporary crown, will likely have to wait until the affected tissues have healed.

The bone can also be healthy enough for implant placement, but might still need time to integrate with the implant before attaching any crown. Instead, we would suture the gums over the implant to protect it, then expose and attach a permanent crown to the implant a few weeks later.

Obtaining even a temporary crown the same day as your implant can do wonders for your appearance. A more important goal, though, is a new tooth that you can enjoy for many, many years. To achieve that may mean waiting a little longer for your new beautiful smile.

If you would like more information on restoring missing teeth with dental implants, please contact us or schedule an appointment for a consultation. You can also learn more about this topic by reading the Dear Doctor magazine article “Implant Timelines for Replacing Missing Teeth.”

By South Lyon Dental Care Center
October 23, 2019
Category: Dental Procedures
Tags: dental implant  
ImplantFailureIsRarebutPossibleHereAreaFewWaystoAvoidIt

Dental implants are all the rage—and for good reason: They’re incredibly “tooth-like,” both in appearance and function. They also have a stunningly high success rate: More than 95% of implants still function after ten years. This means out of thousands of implants installed each year, only a handful fail.

But although that’s an amazingly low number, they’re still failures for real people who’ve suffered a loss. If you’re considering dental implants the chances of that being your experience are quite low. But it could still happen.

Here’s a few things you can do to make sure your implants don’t fail.

Stop smoking. Of the small percentage of implant failures, an inordinate number are smokers. A smoker’s chances of implant failure are roughly double those of non-smokers. Smoking, and to some degree any tobacco use, can make your mouth an unhealthier place: Not only can it increase your dental disease risk, but it can interfere with the healing process after implant placement and increase the chances of early failure.

Manage your health. Diabetes and similar systemic conditions can interfere with the healing process too, which could impact your implant attachment to bone. Diabetics thus run a slight risk of implant failure—but actual failures mostly involve patients who don’t have good control of their symptoms. If you’re a diabetic, properly managing your condition will lower your risk of implant failure to nearly identical that of someone without diabetes.

Treat gum disease. Implants in themselves are immune to disease—but the underlying bone that supports them isn’t. A gum disease infection could eventually weaken and diminish the implant-bone attachment. If this happens around an implant, its stability can be severely compromised. The best strategy is to prevent gum disease through daily, thorough brushing and flossing to remove disease-causing dental plaque. And if you see any symptoms like gum swelling, redness or bleeding, see your dentist as soon as possible.

Your implants could serve you well for decades. Just be sure you’re doing the right things to ensure their longevity.

If you would like more information on dental implants, please contact us or schedule an appointment for a consultation. You can also learn more about this topic by reading the Dear Doctor magazine article “Dental Implants: A Tooth-Replacement Method That Rarely Fails.”